The (Updated) Original 1993 MGRM-ODEON Modular Organ system
Here we have the available circuit boards to build your own Midi Organ System.
Pneumatic Organ Additions or New magnet operated organs.
All these boards are Fully UK Built and tested, by myself.
Configuration is completely up to you, and they can be assembled as easy as A,B,C.
Basically plug and play you just have to wire them to a suitable power supply. Midi player and the magnets
within your organ, and even they are pluggable to the boards for easy on site testing if required.
We are happy to give advice on output power, and many of the original design, have been working on
my installs for over 29years.
Buy from me and My advice is free!
Listed below are all the single components that make up a Larger system.
If you want a basic system for a hand-turned or similar size of instrument Click
HERE
We guarantee workmanship and components for 1 year [5 years if installed by our approved Organ builders],
The only exception is the ULN driver IC's, sorry but if you overload them you replace them!
(A) MIDI Magnet Master Controller will control up to 128 notes + 16 registers. NOW WITH ACTIVE SENSE
FULL MIDI SPECIFICATIONS
HERE
Complete Magnet master controller, can be used with other boards not just Magnet drivers.
Input via Standard 5 pin Midi cable from a SD player, PC, Tablet etc.
Can be programmed by yourself any output can be on any channel (1-16) or Note (1-128) and The 16 registers are on top of the 128 notes if you want to use it as a 144 key instrument!
[We can pre programme it for you if you want us to, £10 extra charge, Just send us your scale. p.s. you can still change scale yourself at a later date.]
Complete board Ready to use. £34.49
72Lx55Wx30H mm
(A-BLE) MIDI Driver Bluetooth Master Controller will control up to 128 notes + 16 registers.
NOW WITH ACTIVE SENSE
Complete Magnet master controller, can be used with other boards not just Magnet drivers.
Input via Bluetooth from our BLE SD MIDI Player.
Or your midi music stored on your Mobile device, then NO SD MIDI Player needed!
Programming features as above.
Complete board Ready to use.
£74.50
100Lx55Wx50H mm
(AP) Magnet/Power supply protection Board.
Unfortunately all computer systems need to switch everything on then off when they first start. With a large organ even for a split second 40+ amps can be drawn from the power supply, and the organ "woofs" 2 ways round this you manually switch on the magnet supply after a few seconds, or you let this board do it for you. It also has a Fuse to protect the Power supply outputs.
Any organ with more than 30 magnets are strongly advised to fit this module.
Complete board Ready to use. £19.50
72Lx55Wx40H mm
Extra Board interconnector's
Cabled, or Cable Free
(plug in just like Lego !)
(BA) Board to Board Cable Free
Ready to use £2.25
27Lx40Wx12H mm
(BBa) 1 in 2 out Board Cable Free
R eady to use. £8.50 . 32Lx96Wx12H mm
(BBb) Board to Board wired. C omplete with 1 x 50mm cable. Ready to use. £11.50
32Lx96Wx12H mm
(BC) Board to 6 x Board wired.
Complete with 1 x 50mm cable. Ready to use. £13.50
78Lx55Wx12H mm
Board to Board Booster
(BDc) Cable or
(BDw) Wire free
Complete board to boost signals if More than 5 boards in any chain.
Bus powered.
Ready to use. £24.00
(CA) 16 OUTPUT REGISTER BOARD
Actually 15 registers + Declanch. To be used inline, all note driver boards after this board can be selected to work from the signals output from this board. Led's to show which register Active. Should 15 registers not be enough this board can be chained, but will only work with one common Declanch. (can also be pre-programmed for Alan Pell Harmonist music I.E. any register selected cancels all others)
Supplied with One IDC 100 or BA connector.
Complete board Ready to use. £23.50
88Lx55Wx12H mm
(CB) 16 OUTPUT REGISTER DRIVER BOARD
15 registers + Declanch. To be used at the end of the line. i.e. after any note/magnet driver boards, as it does not have dual connectors. This board powers magnets directly, so ideal for conversions where an existing pneumatic register box is in place.
Led's to show which register's are active Active.
Supplied with One IDC 100 or BA connector.
Complete board Ready to use.
£25.49
76Lx55Wx12H mm
(DA) 16 NOTE DRIVER BOARD
500mA per output as Standard. Complete Permanent play board Ready to use. £24.49
120Lx55Wx12H mm
(DAR) 16 NOTE DRIVER BOARD with Register Selector
500mA per output as Standard.
Easily selected from Permanent play or Registers with simple jumper.
Led to show board Active.
Supplied with One IDC 50 or BA connector.
Complete board Ready to use. £27.25
120Lx55Wx12H mm
(DB) 24 NOTE DRIVER BOARD
500mA per output as Standard.
Details as (DA) above
Complete board Ready to use. £29.50
170L x 55W x 12H mm
(DBR) 24 NOTE DRIVER BOARD
Register version of above.
Complete board Ready to use. £33.50
170L x 55W x 12H mm
(DC) 32 NOTE DRIVER BOARD
500mA per output as Standard.
Details as (DB) above
Complete board Ready to use. £34.75
215Lx55Wx12H mm
(DCR) 32 NOTE DRIVER BOARD
Register version of above.
Complete board Ready to use. £41.50
15Lx55Wx12H mm
(DD1) 64 NOTE DRIVER BOARD now with,
24 NOTE/40 NOTE SPLIT
500mA outputs. Can be configured so that first 24 notes can be permanent play, next 40 notes on a single register, selected from the available 15 from the standard register board.
This is a standalone board, but can be used with all other boards using a board connector if required
Complete board Ready to use. £51.00
202L x 85W x 15H mm
(DD3) 64 NOTE DRIVER BOARD now with,
24 NOTE/24/16 NOTE SPLIT
500mA outputs. Can be configured so that first 24 notes can be on one register, next 24 on a seperate register, and the third section of 16 notes can be on a third register, or any can be on permanent play..
This is a standalone board, but can be used with all other boards using a board connector if required £54.00
202L x 85W x 15H mm